Blackmagic MultiView 4 HD

$0

A compact multiviewer that shows four SDI sources on one HD display. Each 3G-SDI input re-syncs, so you can mix SD and HD formats and frame rates.

Description

The Blackmagic MultiView 4 HD is a compact multiviewer for four SDI sources. It shows all four feeds on a single HD display, so one monitor can cover a small multicam setup. Each input re-syncs fully, which means you can mix SD and HD formats and frame rates.

Four Views on One HD Screen

MultiView 4 HD splits one HD display into four views. In addition, each view can show a custom label and VU audio meters, and you can turn these overlays on or off.

The multiview output runs from 1080p23.98 up to 1080p60, or as 1080i50, 1080i59.94 or 1080i60. Because every input re-syncs, your sources do not need to match each other. For example, a 1080p25 camera and a 1080i50 feed can sit side by side on the same screen.

Connections and Power

Four 3G-SDI inputs accept SD and HD signals up to 1080p60. The multiview then leaves through one HD-SDI output and one HDMI output, so you can feed two monitors at once. However, there are no loop outputs, so plan your SDI distribution before the shoot.

Power comes from the included 12V supply. Alternatively, the unit accepts 6 to 36V DC and draws just 5.5 W. As a result, it can also run from a DC source on location. Its metal mini converter body measures 134 x 92 x 22 mm and weighs 242 g.

Setup and Where It Fits

MultiView 4 HD has no built-in screen or control panel. Instead, you set labels and options with the free MultiView software for Mac and Windows over USB. Once it is set up, it only needs power, sources and a display.

For example, typical hire uses include:

  • Director and client monitoring on two- to four-camera HD shoots
  • Live streams and small events alongside an ATEM switcher
  • Checking mixed SD and HD sources on one screen
  • Compact video village or flight-case builds where space and power are tight

Note that you will also need a separate HD display with an SDI or HDMI input. Also, ask our team about suitable monitors and SDI cabling. For more than four sources, see the Blackmagic MultiView 16.

Views and Overlays

Views4 independent SDI sources on one HD display, with full frame re-sync on each input
Overlayscustom labels and VU audio meters on each view, switchable on or off

Inputs and Outputs

SDI inputs4 x 10-bit SD-SDI and HD-SDI, auto-switching between SD and HD; rates 270Mb, 1.5G, 3G
Multiview outputs1 x 10-bit HD-SDI and 1 x HDMI type A with monitor EDID support; reclocking on the SDI output
Loop outputs and reference inputnone
Signal quality10-bit 4:2:2 YUV sampling; SDI audio at 48kHz, 24-bit; compliant with SMPTE 259M, 292M, 296M, 425M-B, ITU-R BT.656, ITU-R BT.601; SMPTE 352M payload ID

Supported Video Standards

Input standards525i59.94 NTSC, 625i50 PAL; 720p50/59.94/60; 1080i50/59.94/60; 1080p23.98 to 1080p60; 2Kp23.98/24/25 DCI
Output standards1080i50, 1080i59.94, 1080i60; 1080p23.98 to 1080p60

Control and Configuration

Control panelnone, and no built-in display
Configuration and updatesUSB 2.0 (480Mb/s), with the included updater application
SoftwareMultiView software for Mac (10.15 Catalina, 11.1 Big Sur or later) and Windows 10 64-bit (free)

Power, Size and Environment

Power supplyincluded +12V universal supply with international socket adapters; 6 to 36V DC input range; 5.5W consumption; settings restored at power on after a power failure
Size and weight134 x 92 x 22 mm (5.27 x 3.62 x 0.86 in); 242 g (8.53 oz)
Operating temperature0 to 40°C; storage -20 to 45°C; relative humidity 0 to 90% non-condensing

Download Spec Sheet (PDF)