Blackmagic MultiView 16

$0

A 1RU multiviewer that shows up to 16 SDI sources on one HD or Ultra HD display. Every input re-syncs, so you can mix SD, HD and Ultra HD formats and frame rates.

Description

The Blackmagic MultiView 16 is a 1RU multiviewer for SDI sources. It displays up to 16 feeds on a single HD or Ultra HD screen. Every input re-syncs the full frame, so you can mix SD, HD and Ultra HD formats and frame rates. As a result, one monitor can cover every camera, playback deck and graphics feed on a production.

Layouts and On-Screen Overlays

You can set the output to a 2×2, 3×3 or 4×4 grid. In addition, a solo mode shows any source full screen for a closer check. On an Ultra HD monitor, the 2×2 layout gives each view full 1920 x 1080 resolution with no scaling.

Each view can show a custom label, audio meters and a tally indicator. Meanwhile, you can route one source’s audio to the output while watching every view.

Connections and Signal Handling

Sixteen 6G-SDI inputs each have their own loop output, so signals can continue on to recorders or switchers. The unit sends the multiview out over two HD-SDI, two 6G-SDI and one HDMI connection. Consequently, you can feed more than one monitor at a time. A reference input also accepts Black Burst or Tri-Sync for studio installations.

Note the output frame rates: the multiview runs at 1080i50, 1080i59.94, 1080p25, 1080p29.97, 2160p25 or 2160p29.97. However, the inputs can still run at 23.98 or 24p, because each one re-syncs to the output.

Control and Where It Fits

The front panel has router-style buttons, a spin knob and an LCD. These let you route sources to views and adjust overlays. Because MultiView 16 emulates a Blackmagic Videohub, Videohub software and hardware panels can route inputs over Ethernet. In addition, the included MultiView software for Mac and Windows changes settings and labels remotely.

Typical hire uses include:

  • Video village and director monitoring on multicam shoots
  • Live event and OB gallery monitoring alongside a vision mixer
  • Studio and broadcast installations with reference sync
  • Monitoring mixed-format sources, from SD decks to Ultra HD cameras

You will need a separate HD or Ultra HD display with an SDI or HDMI input. Ask our team about suitable monitors and SDI cabling for your setup.

Views and Overlays

Viewsup to 16, in 2×2, 3×3 or 4×4 layouts, plus solo full screen
Overlayscustom labels, VU audio meters per view, tally

Inputs and Outputs

SDI inputs16 x 10-bit SD-SDI, HD-SDI and 6G-SDI, with full frame re-sync on each input and a loop-through output for each; rates 270Mb, 1.5G, 3G, 6G
Multiview outputs2 x 10-bit HD-SDI, 2 x 10-bit 6G-SDI and 1 x HDMI type A (supports monitor EDID); reclocking on all SDI outputs
Reference inputBlack Burst and Tri-Sync for SD, HD and 4K
Signal quality10-bit 4:2:2 YUV sampling; audio at 48kHz, 24-bit; compliant with SMPTE 259M, 292M, 296M, 425M-B, ITU-R BT.656, ITU-R BT.601

Supported Video Standards

Output standards1080i50, 1080i59.94, 1080p25, 1080p29.97 in HD; 2160p25, 2160p29.97 in Ultra HD
Input standards in SD and HD525i59.94 NTSC, 625i50 PAL; 720p50/59.94/60; 1080i50/59.94/60; 1080p23.98 to 1080p60; 1080PsF23.98 to 1080PsF30
Input standards in 2K, Ultra HD and 4K: 2Kp23.98/24/25 DCI, 2KPsF23.98/24/25 DCI; 2160p23.98, 24, 25, 29.97, 30; 4Kp24 DCI

Control and Configuration

Front panel16 source routing buttons, 5 menu buttons, scroll wheel and colour LCD
External controlBlackmagic Videohub software and SDK, Ethernet Videohub Control Protocol, Videohub Smart Control and Master Control panels; RS-422 via RJ9 connector
Configurationfront panel LCD, or RJ45 Ethernet / USB 2.0 for firmware updates and IP address
SoftwareMultiView software for Mac and Windows (free)

Power and Size

Power supply100-240V AC via IEC power cable, 45W consumption; settings restored instantly at power on after a power failure
Physical size1 rack unit, less than 6 inches deep
Operating temperature0 to 40°C

Download Spec Sheet (PDF)

Additional information

Weight3.1 kg