Blackmagic HyperDeck Studio Mini

$0

A compact broadcast deck that records ProRes, DNx and H.264 to dual SD cards from 6G-SDI, up to Ultra HD 2160p30. It also plays HD fill and key graphics into a switcher.

Category:

Description

The Blackmagic HyperDeck Studio Mini is a compact broadcast deck that records ProRes, DNx and H.264 to SD cards. Its 6G-SDI input handles every format up to Ultra HD 2160p30. Because two SD slots record one after the other, you can roll continuously through long sessions. As a result, it suits live events, studio ISO recording and graphics playback.

Compact Design and Power

The deck takes up one third of a rack width and measures less than 7 inches deep. Consequently, it can sit on a desk or share a rack shelf with other compact units. An internal 100-240V supply runs it from mains power. In addition, its Ethernet port supports Power over Ethernet (PoE+).

Recording, Playback and Graphics

The front panel has VTR-style transport buttons, a rotary wheel and a 2.2 inch colour LCD. The screen shows video, audio meters and timecode, so you can confirm a recording at the deck. Meanwhile, the HDMI output feeds a monitor or TV for a larger view.

For graphics, the deck plays ProRes 4444 files in 720p and 1080p with fill and key. It sends fill and key over its two SDI outputs to a switcher for downstream keying. In addition, a built-in reference generator outputs Tri-Sync or Black Burst for syncing other gear.

Control and Where It Fits

The RS-422 remote input accepts standard deck control from edit controllers and switchers. Because it supports the HyperDeck Ethernet Protocol, ATEM switchers can also control it over the network. You can upload playback files over FTP as well.

Typical hire uses include:

  • ISO or program recording at live events and webcasts
  • Fill and key graphics playback into a vision mixer
  • Ultra HD 30p recording from a single camera or switcher feed
  • Playback of video packages and stings during live shows

Note that it has no HDMI input, timecode connector or analog audio, and it records to SD cards only. If you need HDMI capture or USB drive recording, ask about the HyperDeck Studio HD range.

Video and Audio Connections

SDI video1 input, 2 outputs (supports fill and key); rates 270Mb, 1.5G, 3G, 6G
HDMI1 x HDMI type A output with 8 channels of embedded audio; no HDMI input
Embedded audio16 SDI channels in and out; no analog audio
ReferenceTri-Sync or Black Burst input, plus built-in reference generator output
Timecode connectionnone

Recording Media and Formats

Media2 x SD card slots (UHS-II) for SD, HD and Ultra HD recording, formatted ExFAT (Windows/Mac) or OS X Extended (Mac)
CodecsProRes 422 HQ, 422, LT and Proxy; DNxHD 220x/145/45 and DNxHR HQX/SQ/LB (QuickTime and MXF); ProRes 4444 in HD for fill and key playback; H.264 in 720p and 1080p
Quality4:4:4:4 sampling, 10-bit colour, Rec 601 and Rec 709 colour space; audio at 48kHz, 24-bit
Metadata and complianceRP188 and closed captioning; SMPTE 259M, 292M, 296M, 425M

Supported Video Standards

SD525i59.94 NTSC, 625i50 PAL
HD720p50/59.94/60; 1080p23.98 to 1080p60; 1080PsF23.98 to 1080PsF30; 1080i50/59.94/60
Ultra HD2160p23.98, 24, 25, 29.97, 30

Control, Power and Size

Front panel8 buttons, 2.2 inch colour display, rotary wheel
External controlRS-422 remote in for deck control, SDI start/stop, timecode run, Ethernet HyperDeck Control Protocol, remote FTP upload
Ethernet1 x port with Power over Ethernet (PoE+)
USB1 x USB 2.0 Type-C for software updates and HyperDeck Utility control
Power supply1 x internal 100-240V AC
Physical size1/3 rack unit width, less than 7 inches deep
Operating temperature0 to 40°C

Download Spec Sheet (PDF)

Additional information

Weight1.4 kg