Blackmagic HyperDeck Studio HD Plus

$0

A half-rack broadcast deck that records and plays SDI and HDMI video to SD cards or USB-C drives. Its 6G-SDI connections handle up to Ultra HD 30p, with fill and key playback, RS-422 control and timecode.

Category:

Description

The Blackmagic HyperDeck Studio HD Plus is a compact broadcast deck that records and plays back SDI and HDMI video. It captures to SD cards or external USB-C drives in ProRes, DNx or H.264. Despite the HD name, its 6G-SDI connections handle Ultra HD up to 30p. As a result, it suits live events, studio ISO recording and playback of pre-built content.

Half-Rack Design with Flexible Power

The deck measures half a rack wide and one rack unit high. Consequently, two units can sit side by side in a rack shelf, such as Blackmagic’s Teranex Mini Rack Shelf. An internal 100-240V supply handles mains power, while a 4-pin XLR input accepts 12V DC. This lets you run it from a battery on location or at an outside broadcast.

Recording, Playback and Monitoring

Two SD card slots accept UHS-I and UHS-II cards, and the USB-C port records to external drives. Meanwhile, the front panel provides transport buttons, a search dial and a 2.2 inch LCD. The screen shows video, audio meters and timecode. A built-in speaker and headphone jack let you check audio at the deck.

For playback, two 6G-SDI outputs can play ProRes 4444 files as fill and key up to 1080p60. In addition, a dedicated 3G-SDI monitor output shows overlays and can apply 3D LUTs.

Integration with Live Production Systems

RS-422 in and out ports provide standard deck control. In addition, the remote output sends front panel button presses to another deck. The reference input accepts Tri-Sync or Black Burst, while BNC connections carry timecode in and out.

Because it supports the HyperDeck Ethernet Protocol, ATEM switchers and other systems can control it over the network. It also accepts remote FTP uploads, so you can load playback files without removing media. Typical hire uses include:

  • ISO or program recording at live events and conferences
  • Playback of video packages, stings and graphics into a vision mixer
  • Fill and key graphics playback up to 1080p60
  • Studio recording alongside ATEM switchers, controlled over Ethernet

Video and Audio Connections

SDI video1 input, 2 outputs (including loop out; fill and key playback), 1 monitor output; rates 270Mb, 1.5G, 3G, 6G
HDMI 2.0 video1 input, 1 output
Embedded audio16 channels in and out over SDI, 8 channels in and out over HDMI
Audio monitoringbuilt-in mono speaker, 1 x 6.35 mm headphone jack
Timecode and reference1 x BNC in and 1 x BNC out each; reference accepts Tri-Sync or Black Burst

Recording Media and Formats

Media2 x SD card slots (UHS-I and UHS-II), plus USB-C external drive recording, formatted ExFAT (Windows/Mac) or HFS+ (Mac)
CodecsProRes HQ, 422, LT and Proxy up to 2160p30; ProRes 4444 playback only up to 1080p60 (fill and key); DNxHD 220x/145/45 up to 1080p60; DNxHR HQX/SQ/LB up to 2160p30; H.264 up to 1080p60
Quality4:2:2 YUV, 10-bit video; audio at 24-bit, 48kHz
Colour and HDRRec 601, Rec 709, Rec 2020; Hybrid Log-Gamma and ST2084 (PQ); 33 point 3D LUTs on SDI monitor out
SDI metadataRP188, CEA-708 closed captions, HDR metadata

Supported Video Standards

SD525i59.94 NTSC, 625i50 PAL
HD720p50/59.94/60; 1080i50/59.94/60; 1080p23.98 to 1080p60; 1080PsF23.98 to 1080PsF30
2K and 4K DCI2Kp23.98 to 2Kp30 DCI; 4Kp23.98 to 4Kp30 DCI
Ultra HD2160p23.98, 24, 25, 29.97, 30

Control, Power and Size

Front panel13 buttons for transport and device control, search dial, 2.2 inch colour LCD for video, audio, timecode and menus
External control1 x RS-422 in, 1 x RS-422 out for deck control; SDI start/stop, timecode run
Ethernet1Gb/s (Blackmagic HyperDeck Ethernet Protocol, remote FTP file upload)
USB1 x USB Type-C 3.0 (up to 5Gb/s) for external drive recording, webcam out, configuration and updates
Power1 x internal 100-240V AC; 1 x 4-pin XLR 12V DC in for external supply or battery; 100W max
Physical sizehalf rack width, 1 rack unit height; 210 x 177 x 44.2 mm (W x D x H); weight 1.15 kg
Operating temperature0 to 40°C

Download Spec Sheet (PDF)

Additional information

Weight1.95 kg