Netgear M4300-28G 24-Port Network Switch

$0

A 1RU fully managed switch with 24 Gigabit ports, two 10GBASE-T ports and two SFP+ slots. IGMP multicast, VLANs and QoS keep IP video, audio and control traffic in order.

Description

The Netgear M4300-28G is a 1RU fully managed switch with 24 Gigabit Ethernet ports and four 10G ports. It gives a production one dependable network for cameras, streaming encoders, control systems and computers. Because it supports VLANs, multicast and quality of service, you can keep video, audio and control traffic in order. As a result, it suits live events, broadcast flypacks and AV-over-IP setups.

Ports and Build

The 24 copper ports run at 10/100/1000 Mbps. In addition, two 10GBASE-T ports and two SFP+ slots each run at 1G or 10G. These suit fast links to a server, a second switch or a fibre run across a venue. Note that this model does not supply Power over Ethernet, so PoE devices need their own power or injectors.

The switch takes one rack unit in a standard 19-inch rack and measures 31 cm deep. It runs from one modular 150W AC power supply, with a second bay for a redundant unit. Meanwhile, the fans run at a quiet 30.3 dB, so it can sit near a control desk.

Network Features for Live Production

Netgear’s IGMP Plus comes pre-configured on the default VLAN, so multicast streams work with little manual setup. Consequently, only the devices that subscribe to a stream receive it. You can also split traffic into VLANs, such as one for video and one for control. In addition, quality of service settings help keep time-sensitive audio and video ahead of file transfers.

The switch also supports IEEE 1588 PTPv2 as a transparent clock, which helps timing-sensitive audio and video networks. Moreover, you can stack up to eight M4300 units and manage them as one switch. A dedicated front Ethernet port handles out-of-band management, alongside RJ45 and Mini-USB console ports.

Where It Fits on a Shoot

Productions typically hire the M4300-28G for:

  • NDI and other IP video networks at live events and webcasts
  • IP audio networks, such as Dante, for live sound and broadcast
  • PTZ camera control and remote production setups
  • Broadcast flypacks and OB racks that need a 1RU managed switch
  • Connecting streaming encoders, playback machines and media servers

Plan time to set up VLANs and other advanced settings before the shoot, through the web interface or command line. Ask our team about network cabling and SFP+ modules for your setup.

ModelM4300-28G (GSM4328S), non-PoE version
1G copper ports24 x 10/100/1000BASE-T RJ45 (no 10M half duplex on ports 17-24)
10G copper ports2 x 100M/1G/10GBASE-T RJ45 (independent)
10G fibre ports2 x 1G/10GBASE-X SFP+ (independent)
Total usable ports24 x 1G, 4 x 10G
Switching fabric128 Gbps, non-blocking
Throughput95.2 Mpps
Switchingfully managed Layer 2 and Layer 3 (IPv4 and IPv6)
MulticastNETGEAR IGMP Plus, pre-configured on default VLAN 1; IGMP snooping; PIM multicast routing
TimingIEEE 1588 PTPv2 1-step transparent clock (configured via CLI)
Stackingup to 8 units, with non-stop forwarding and hitless failover
MAC address table16K; concurrent VLANs: 4K
Jumbo framesup to 9K
Managementweb GUI and CLI
Management ports1 x 1G out-of-band Ethernet (front), RS232 RJ45 console (rear), Mini-USB console (front), USB storage port (front)
Power over Ethernetnot supported on this model
Power supply2 modular PSU bays; 1 x APS150W 150W AC PSU included; second bay for redundant (RPS) PSU
Power consumption34.5W max
Heat dissipation117.78 BTU/hr
Coolingfixed fans, front-to-back airflow
Acoustic noise30.3 dB at 25°C
Form factorfull width, 1RU, 19-inch rack mount (two-post brackets included)
Dimensions440 x 310 x 44 mm (W x D x H)
Weight4.51 kg

Download Spec Sheet (PDF)

Additional information

Weight5.3 kg