Capture stabilised, free-floating shots with your GoPro HERO4, HERO3+, or HERO3 camera while mounted to the Feiyu G4. It features a 4.6″ grip that is held and operated using a single hand and features four different operating modes for increased creative possibilities. You can choose to lock the camera in place along all three axes (pan, tilt, and roll), or select modes where the camera will smoothly follow as you pan and tilt the handle. A single LED push-button on the handle allows you to switch between modes, which flashes to indicate the mode selected.
Two sets of screws for the camera mount are provided: a shorter set for securing just the GoPro, and a longer set to accommodate a GoPro with an attached LCD Touch BacPac. The back of the camera mount maintains open access to the camera’s power and video ports and lets you view the built-in LCD on the HERO4 Silver or the LCD Touch BacPac. The G4 is powered using two rechargeable 900mAh batteries, which slot into the handle. A battery indicator light on the device lets you know when it’s time to recharge the batteries using the included charger.
Five modes with single button operation
LED battery level indicator light
Maintains access to power and video output ports
Handle threaded to accept optional extension pole
Longer set of camera mount screws included to accommodate a GoPro with attached Touch LCD BacPac
Four batteries and charger included
Optional Gimbal Remote Control
Pan Following Mode: Locks tilt and roll axes. Camera pans smoothly to follow the direction of the handle.
Tilt and Pan Following Mode: Locks roll axis. Camera smoothly follows the pan and tilt motion of the handle
All Axis Lock: Locks the pan, tilt, and roll axes of the camera in the position it is in when mode is activated
Inverted Mode: Allows you to turn the gimbal upside-down. This mode is an inverted version of the Pan Following Mode
Standby Mode: The gimbal remains on but the motor is shut down